2024 Infiniti QX55 EssentialFACTORY OEM SERVICE PROCEDURE

Additional Service When Replacing Control Unit: BCM: Description

BEFORE REPLACEMENT 

SYMBOL CONSULT When replacing BCM, save or print current vehicle specification configuration before replacement.

NOTE: SYMBOL If "Before Replace ECU" cannot be used, use the "After Replace ECU" or "Manual Configuration" after replacing BCM.

AFTER REPLACEMENT 

CAUTION:

SYMBOL CONSULT

  • When replacing BCM, you must perform "After Replace ECU".
    • Complete the procedure of "After Replace ECU" in order.
    • If you set incorrect "After Replace ECU", incidents might occur.
    • Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
  • When replacing BCM, perform the system initialization (NATS).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.