2022 Infiniti QX50 AutographFACTORY OEM SERVICE PROCEDURE

Power Window Serial Link

Main power window and door lock/unlock switch, power window and door lock/unlock switch RH, rear power window switch LH/RH and BCM transmit and receive the signal by power window serial link.

The signal mentioned below is transmitted from BCM to main power window and door lock/unlock switch, power window and door lock/unlock switch RH and rear power window switch LH/RH.

  • Keyless power window down signal
  • Door switch signal

The signal mentioned below is transmitted from main power window and door lock/unlock switch to power window and door lock/unlock switch RH and rear power window switch LH/RH.

  • Front RH door window and rear door window operation signal
  • Power window lock switch signal
  • Retained power operation signal
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.