2021 Infiniti Q60 Luxe, AWDFACTORY OEM SERVICE PROCEDURE

DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P26A5

ENGINE COOLANT B/V A POSI SEN

(Engine coolant bypass valve A position sensor circuit range/performance)

Diagnosis condition

--

Signal (terminal)

Multi-way control valve position sensor signal

Threshold

  • A voltage signal transmitted from the multi-way control valve position sensor is 4.76 V or more/4.3 V or less. Outside the above threshold when the valve is moved to the upper side stopper after ignition OFF
  • A voltage signal transmitted from the multi-way control valve position sensor is 0.8 V or more/0.34 V or less. Outside the threshold when the valve is moved to the lower side stopper after engine start

Diagnosis delay time

--

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.