2021 Infiniti Q60 Luxe, AWDFACTORY OEM SERVICE PROCEDURE

Confirmation Procedure

  1. PRECONDITIONING 

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 10 V or more at idle.

    SYMBOL With CONSULT

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
    4. Turn ignition switch ON.
    5. On the CONSULT screen, select "ENGINE" >> "DATA MONITOR" >> "COOLANT TEMP/S".
    6. Check "COOLANT TEMP/S" indication value.

    SYMBOL With GST

    Follow the procedure "With CONSULT" above.

    Is the value of "COOLANT TEMP/S"-5 deg.C (23 deg.F) and 45 deg.C (113 deg.F)?

    YES

    GO TO 2.

    NO

    Warm up the engine until the value of "COOLANT TEMP/S" indicates -5 deg.C (23 deg.F) and 45 deg.C (113 deg.F). And then GO TO 2.

    NO

    Cool the engine down to the value of "COOLANT TEMP/S" indicates -5 deg.C (23 deg.F) and 45 deg.C (113 deg.F). And then GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch OFF and wait at 10 seconds.
    2. Turn ignition switch ON.
    3. Set the selector lever in N range.
    4. Start the engine and let it idle for 20 seconds or more.
    5. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    INSPECTION END

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.