2021 Infiniti Q60 Luxe, AWDFACTORY OEM SERVICE PROCEDURE

DTC Index

DTC Index

DTC Description
P0010  INTAKE VALVE TIMING CONTROL
P0011  IVT CONTROL
P0012  INTAKE VALVE TIMING CONTROL
P0014  EVT CONTROL
P0015  EXHAUST VALVE TIMING CONTROL
P0016  INTAKE VALVE TIMING CONTROL
P0017  EXHAUST VALVE TIMING CONTROL
P0018  INTAKE VALVE TIMING CONTROL
P0019  EXHAUST VALVE TIMING CONTROL
P0020  INTAKE VALVE TIMING CONTROL
P0021  IVT CONTROL
P0022  INTAKE VALVE TIMING CONTROL
P0024  EVT CONTROL
P0025  EXHAUST VALVE TIMING CONTROL
P0030  A/F SENSOR 1 HEATER
P0031  A/F SENSOR 1 HEATER
P0032  A/F SENSOR 1 HEATER
P0037  HO2S2 HEATER
P0038  HO2S2 HEATER
P0046  WASTEGATE CONTROL MOTOR
P004B  WASTEGATE CONTROL ACTUATOR
P0050  A/F SENSOR 1 HEATER
P0051  A/F SENSOR 1 HEATER
P0052  A/F SENSOR 1 HEATER
P0053  A/F SENSOR 1 HEATER
P0057  HO2S2 HEATER
P0058  HO2S2 HEATER
P0059  A/F SENSOR 1 HEATER
P0078  EVT CONTROL SOLENOID VALVE
P0084  EVT CONTROL SOLENOID VALVE
P0087  FRP CONTROL SYSTEM
P0088  FRP CONTROL SYSTEM
P0090  HIGH PRESSURE FUEL PUMP
P0096  INTAKE AIR TEMPERATURE SENSOR 2 BANK 1
P0097  IAT SENSOR 2
P0098  IAT SENSOR 2
P00B3  ENGINE COOLANT TEMPERATURE SENSOR 2
P00B4  ENGINE COOLANT TEMPERATURE SENSOR 2
P00D2  HO2S2 HEATER
P00D4  HO2S2 HEATER
P00E0  CHARGE AIR COOLER COOLANT TEMPERATURE SENSOR
P00E1  CHARGE AIR COOLER COOLANT TEMPERATURE SENSOR
P00FE  EVAP CONTROL SYSTEM
P0101  MAF SENSOR
P0102  MAF SENSOR
P0103  MAF SENSOR
P0106  MANIFOLD ABSOLUTE PRESSURE SENSOR
P010A  MANIFOLD ABSOLUTE PRESSURE SENSOR
P010B  MAF SENSOR
P010C  MAF SENSOR
P010D  MAF SENSOR
P0111  IAT SENSOR
P0112  IAT SENSOR
P0113  IAT SENSOR
P0116  ECT SENSOR
P0117  ECT SENSOR
Chapter Navigation
Return to Chapter: Engine Control System (DTCS) (1 Of 7)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.