Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Infiniti Q60 Luxe, AWDFACTORY OEM SERVICE PROCEDURE
Work Procedure
VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced.
NOTE:
Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M).
- CHECK VIN
Check the VIN of the vehicle and note it. Refer to Vehicle Description .
GO TO 2.
- PERFORM VIN REGISTRATION
With CONSULT
- Turn ignition switch ON and engine stopped.
- On CONSULT screen, select "ENGINE">>"Work support">>"VIN REGISTRATION".
- Follow the instruction of CONSULT display.
END
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.