Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Automatic Window Adjusting Function
When the driver/passenger door(s) is open, the window of the opened door is lowered approximately 10 mm (0.39 in).
When the door is closed, the window is raised to the fully closed position.
Automatic window adjusting function system (opening operation) does not operate when the following item occurs.
- The window is 10 mm (0.39 in) or more open from the fully closed position.
- The automatic window adjusting function system (opening operation) operation.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.