Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Without Direct Adaptive Steering System
- If any malfunction occurs in the system and control module detects the malfunction, power steering warning lamp on combination meter turns ON to indicate system malfunction.
- When power steering warning lamp is ON, the system enters into a manual steering state. (Control turning force steering wheel becomes heavy.)
|
DTC |
Fail-safe condition |
|
C1143 |
Normal steering state |
|
C1601 |
Manual steering state |
|
C1602 |
Constant steering assist level state |
|
C1604 |
Manual steering state |
|
C1606 |
Manual steering state |
|
C1607 |
Constant steering state |
|
C1608 |
Manual steering state |
|
C1609 |
Constant steering state |
|
U1000 |
Constant steering state |
|
U1010 |
Constant steering state |
|
U140E |
Normal steering state |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
