Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Test Item

Test item	Full spell	Condition
BOOST PRESSURE CONTROL PRESSURE TRANSDUCER	BOOST PRESSURE CONTROL PRESSURE TRANSDUCER	Follow the instruction of CONSULT display.
CAMSHAFT POSITIONER	CAMSHAFT POSITIONER	Apply parking brake. Move selector lever to position 'P' or 'N' on vehicles with automatic transmission. During the test the engine speed must be between 2, 700 and 3, 500 RPM.
CAUSES OF ENGINE STOP PREVENTION	CAUSES OF ENGINE STOP PREVENTION	Follow the instruction of CONSULT display.
CHECK ACTIVATED CHARCOAL CANISTER SHUTOFF VALVE	CHECK ACTIVATED CHARCOAL CANISTER SHUTOFF VALVE	Follow the instruction of CONSULT display.
CHECK BOOST PRESSURE CONTROL	CHECK BOOST PRESSURE CONTROL	Follow the instruction of CONSULT display.
Check purging pressure control	Check purging pressure control	Follow the instruction of CONSULT display.
Check coolant thermostat heating element	Check coolant thermostat heating element	Follow the instruction of CONSULT display.
CHECK COOLANT PUMP SWITCHOVER VALVE	CHECK COOLANT PUMP SWITCHOVER VALVE	Follow the instruction of CONSULT display.
CHECK CYLINDER FUEL INJECTORS	CHECK CYLINDER FUEL INJECTORS	Follow the instruction of CONSULT display.
CHECK CYLINDER FUEL INJECTORS FOR LEAKS	CHECK CYLINDER FUEL INJECTORS FOR LEAKS	Follow the instruction of CONSULT display.
CHECK DECELERATION AIR SWITCHOVER VALVE	CHECK DECELERATION AIR SWITCHOVER VALVE	Combustion engine AT STANDSTILL. Ignition ON.
CHECK ENGINE OIL PUMP VALVE	CHECK ENGINE OIL PUMP VALVE	Combustion engine AT STANDSTILL. Ignition ON.
CHECK EXHAUST CAMSHAFT SOLENOID	CHECK EXHAUST CAMSHAFT SOLENOID	The ignition is switched on. Engine running at idle Coolant temperature > 80 deg.C (176 deg.F)
CHECK FUEL HIGH PRESSURE CIRCUIT	CHECK FUEL HIGH PRESSURE CIRCUIT	Ignition ON. Apply parking brake.
CHECK FUEL HI PRESS CIRC FOR LEAKTIGHTNESS	CHECK FUEL HIGH PRESSURE CIRCUIT FOR LEAKTIGHTNESS	Ignition ON. Coolant temperature between 75 deg.C and 105 deg.C (167 deg.F and 221 deg.F) Fuel temperature between 40 deg.C and 80 deg.C (104 deg.F and 176 deg.F) Start combustion engine. Combustion engine IDLING Switch off all current consumers. Connect charger for battery.
CHECK FUEL PRESSURE AND TEMPERATURE SENSOR RAIL PRESSURE	CHECK FUEL PRESSURE AND TEMPERATURE SENSOR	Combustion engine IDLING. Coolant temperature between 75 deg.C (167 deg.F) and 105 deg.C (221 deg.F) All electrical accessories must be switched OFF.
Check fuel tank pressure sensor	Check fuel tank pressure sensor	Follow the instruction of CONSULT display.
CHECK INTAKE CAMSHAFT SOLENOID	CHECK INTAKE CAMSHAFT SOLENOID	The ignition is switched ON. Engine running at idle Coolant temperature > 80 deg.C (176 deg.F)
CHECK LEAK TEST OF FUEL TANK	CHECK LEAK TEST OF FUEL TANK	Follow the instruction of CONSULT display.
CHECK POWER SUPPLY	CHECK POWER SUPPLY	Follow the instruction of CONSULT display.
CHECK PURGING SWITCHOVER VALVE	CHECK PURGING SWITCHOVER VALVE	Combustion engine AT STANDSTILL Ignition ON.
CHECK SYSTEM DRIVE AUTHORIZATION	CHECK SYSTEM DRIVE AUTHORIZATION	Follow the instruction of CONSULT display.
CHECK THROTTLE VALVE ACTUATOR	CHECK THROTTLE VALVE ACTUATOR	Coolant temperature > 80 deg.C (176 deg.F) Ignition ON The combustion engine is at a standstill. Accelerator pedal NOT OPERATED
CK ENG AND AC WITH INTGRTED CONT FAN MOTOR	CK ENG AND AC WITH INTGRTED CONT FAN MOTOR	Follow the instruction of CONSULT display.
COMPONENT QUANTITY CONTROL VALVE	COMPONENT QUANTITY CONTROL VALVE	Follow the instruction of CONSULT display.
COMPRESSION TEST	COMPRESSION TEST	Follow the instruction of CONSULT display.
ENGINE DIAGNOSIS INDICATOR LAMP	ENGINE DIAGNOSIS INDICATOR LAMP	Follow the instruction of CONSULT display.
Malfunction status of stop/start system	Malfunction status of stop/start system	Follow the instruction of CONSULT display.
FUEL PUMP	FUEL PUMP	Follow the instruction of CONSULT display.
MIXTURE ADAPTATION	MIXTURE ADAPTATION	Engine speed: 400 - 800 RPM Coolant temperature between 40 deg.C (104 deg.F) and 80 deg.C (176 deg.F) Engine load: 30% or less Selector lever: P or N
MIXTURE FORMATION	MIXTURE FORMATION	Follow the instruction of CONSULT display.
PARTIAL LOAD OPERATION CRANKCASE VENTILATION VALVE	PARTIAL LOAD OPERATION CRANKCASE VENTILATION VALVE	Follow the instruction of CONSULT display.
Purging switchover valve	Purging switchover valve	Follow the instruction of CONSULT display.
QUANTITY CONTROL VALVE	QUANTITY CONTROL VALVE	Follow the instruction of CONSULT display.
RAIL PRESSURE REDUCTION	RAIL PRESSURE REDUCTION	Follow the instruction of CONSULT display.
REQUIREMENTS FOR AUTOMATIC ENGINE START	REQUIREMENTS FOR AUTOMATIC ENGINE START	Follow the instruction of CONSULT display.
THROTTLE VALVE ACTUATOR	THROTTLE VALVE ACTUATOR	Follow the instruction of CONSULT display.
THROTTLE VALVE STICKS ICED UP	THROTTLE VALVE STICKS ICED UP	Follow the instruction of CONSULT display.
WIDE OPEN THROTTLE OPERATION VENT LINE HEATING ELEMENT	WIDE OPEN THROTTLE OPERATION VENT LINE HEATING ELEMENT	Follow the instruction of CONSULT display.

Safety Warning

Active Test Mode

Use the Manual With the Right Hardware

When to See a Mechanic