Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Compartment (Front View)
|
No. |
Component |
Function |
|
|
Quantity control valve |
|
|
|
Fuel pressure and temperature sensor |
|
|
|
Pressure sensor downstream of air filter |
The pressure sensor downstream of air filter is located on intake air duct and detects intake air pressure downstream of the air filter. |
|
|
Full-load operation vent line heater element |
|
|
|
Fuel injector |
|
|
|
Intake camshaft position sensor |
|
|
|
Intake camshaft actuator |
|
|
|
Exhaust camshaft position sensor |
|
|
|
Exhaust camshaft actuator |
|
|
|
Divert air switchover valve |
|
|
|
Heated oxygen sensor |
|
|
|
Air fuel ratio (A/F) sensor |
|
|
|
Ignition coil |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
