Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Application Item
CONSULT performs the following functions via CAN communication with steering column control module.
|
Diagnosis mode |
Description |
|
ECU Identification |
Allows confirmation of steering column control module part number. |
|
Self Diagnostic Result |
Displays the diagnosis results judged by steering column control module. |
|
Data Monitor |
Displays the real-time input/output data from steering column control module input/output data. |
|
Active Test |
Steering column control module can provide a drive signal to electronic components to check their operations. |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.