2018 Infiniti QX60 AWDFACTORY OEM SERVICE PROCEDURE

Operating Conditions

Operating Condition

Operation starts

Operation stops

Emergency brake operation
  • Vehicle speed is 15 km/h (9 MPH) or more
  • Emergency braking status is detected
  • During acceleration
  • Vehicle stopped

ABS operation (extended)
  • ABS operates continuously for 2 seconds or more
  • Brake pedal is depressed

Forward emergency braking operation

System detects that forward emergency braking is operating

2 seconds after operation start

When lateral slippage during cornering occurs
  • Vehicle speed is 30 km/h (19 MPH) or more
  • System detects that the vehicle is in lateral slippage state
  • System detects that the vehicle is driving on a curve
  • Vehicle stopped
  • 1 second or more after maintaining steering wheel angle in straight driving state

During emergency steering operations
  • Vehicle speed is 60 km/h (36 MPH) or more
  • Steering wheel angle is 90 degrees or more
  • System detects that steering wheel is rotated for emergency

When the vehicle is inclined excessively
  • Vehicle speed is 30 km/h (19 MPH) or more
  • System detects that the vehicle inclined excessively
  • During acceleration
  • Vehicle stopped
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.