Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Special Repair Requirement List
x: Applicable
|
Part Name |
Service Performed |
Service Manual Item |
Reference |
|
|
Replacement |
Removal |
|||
|
ECM |
x |
-- |
Additional service when replacing ECM |
|
|
Accelerator Pedal Position Sensor |
x |
x *1 |
Accelerator Pedal Released Position Learning |
|
|
Electric Throttle Control Actuator |
x |
x *1, 2 |
Throttle Valve Closed Position Learning |
|
|
Idle Air Volume Learning |
||||
|
Electric Intake Valve Timing Control Module |
x |
x *1 |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
Electric Intake Valve Timing Control Actuator |
x |
x *1 |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
Crankshaft Position Sensor |
x |
-- |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
Intake Camshaft Position Sensor |
x |
-- |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
Exhaust Camshaft Position Sensor |
x |
-- |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
Engine Mechanical Parts
|
x |
x |
Electric Intake Valve Timing Control Actuator Reference Position Learning |
|
|
A/F Sensor 1 |
x |
-- |
Idle Air Volume Learning |
|
|
O2 Sensor 2 |
x |
-- |
Idle Air Volume Learning |
|
|
Mass Air Flow Sensor |
x |
-- |
Idle Air Volume Learning |
|
|
Repair or replacement of parts affecting air-fuel ratio |
x |
-- |
Idle Air Volume Learning |
|
*1: Harness connector disconnection is included.
*2: Carbon deposit cleaning is included.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.