Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Work Procedure
- CHECK FRONT PASSENGER SEAT
Perform the following items.
- Remove any protective cover present on the front passenger seat.
- Check that there is nothing on or under the front passenger seat.
- Check that the seat belt buckle switch (passenger side) is unfasten.
- Move the front passenger seat as close to the center position as possible (in both the vertical and horizontal directions).
- Adjust the seat surface of the front passenger seat to the most horizontal position possible.
- Adjust the backrest of the front passenger seat to the most vertical position possible.
- If available, move seat cushion length adjustment to the rear most position.
GO TO 2.
- CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT
With CONSULT
- Turn ignition switch ON.
- Check that DTC is not detected with air bag diagnosis sensor unit.
GO TO 3.
- PERFORM TEACH IN PROCESS
Select "Occupant classification unit">>"Work support">>"Teach in process".
NOTE: SST: KV9950H0140 is required for performing "Teach in process".Is "SUCCESS" displayed on CONSULT screen?
YES
END
NO
Follow the instruction of CONSULT display.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.