Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Stop/Start System
|
DTC No. |
Malfunction type |
Engine operating condition in fail-safe mode |
|
|
P0001 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0003 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0004 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0011 |
SIGNAL PLAUSIBILITY ERROR |
Prohibits the stop/start operation. |
|
|
P0012 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0016 |
SIGNAL PLAUSIBILITY ERROR |
Prohibits the stop/start operation. |
|
|
SIG ABOVE ALLOWABLE RANGE |
Prohibits the stop/start operation. |
||
|
P0017 |
SIGNAL PLAUSIBILITY ERROR |
Prohibits the stop/start operation. |
|
|
SIG ABOVE ALLOWABLE RANGE |
Prohibits the stop/start operation. |
||
|
P0087 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
MISSING MESSAGE |
Prohibits the stop/start operation. |
||
|
P0088 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0106 |
SG BS LVL O-OF RNG/ZR AJST ERR |
Prohibits the stop/start operation. |
|
|
SIGNAL STUCK IN RANGE |
Prohibits the stop/start operation. |
||
|
P0107 |
CIRCUIT SHORT TO GROUND |
Prohibits the stop/start operation. |
|
|
P0108 |
CIRCUIT SHORT TO BATTERY |
Prohibits the stop/start operation. |
|
|
P0115 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0116 |
SIGNAL COMPARE ERROR |
Prohibits the stop/start operation. |
|
|
SIGNAL PLAUSIBILITY ERROR |
Prohibits the stop/start operation. |
||
|
SIG BELOW ALLOWABLE RANGE |
Prohibits the stop/start operation. |
||
|
SIG ABOVE ALLOWABLE RANGE |
Prohibits the stop/start operation. |
||
|
SIGNAL INVALID |
Prohibits the stop/start operation. |
||
|
P0117 |
CIRCUIT SHORT TO GROUND |
Prohibits the stop/start operation. |
|
|
P0118 |
CIRCUIT SHORT TO BATTERY |
Prohibits the stop/start operation. |
|
|
P0119 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0119 |
SIG RTE OF CHNG ABV THRESHLD |
Prohibits the stop/start operation. |
|
|
P0190 |
CIRC VOLT BELOW THRESHOLD |
Prohibits the stop/start operation. |
|
|
CIRC VOLT ABOVE THRESHOLD |
Prohibits the stop/start operation. |
||
|
P0191 |
CIRC VOLT BELOW THRESHOLD |
Prohibits the stop/start operation. |
|
|
CIRC VOLT ABOVE THRESHOLD |
Prohibits the stop/start operation. |
||
|
P0192 |
CIRCUIT SHORT TO GROUND |
Prohibits the stop/start operation. |
|
|
P0193 |
CIRCUIT SHORT TO BATTERY |
Prohibits the stop/start operation. |
|
|
P0300 |
SIG ABOVE ALLOWABLE RANGE |
Prohibits the stop/start operation. |
|
|
P0335 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0339 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0341 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0342 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0343 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0366 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0367 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0368 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P0697 |
SYSTEM INTERNAL MALFUNCTN |
Prohibits the stop/start operation. |
|
|
P167B |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1CDE |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1CDF |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1CE2 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1D04 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1D05 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1D06 |
NO SUBTYPE INFORMATION |
Prohibits the stop/start operation. |
|
|
P1D07 |
SUPERVISION SOFTWARE ERROR |
Prohibits the stop/start operation. |
|
|
P2617 |
CIRCUIT OPEN |
Prohibits the stop/start operation. |
|
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.