Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Self Diagnostic Result Mode
Self Diagnostic ItemÂ
Regarding items of DTC, refer to DTC Index .
How to Erase DTCÂ
- If ignition switch is continuously in the ON position after a DTC is detected, turn ignition switch OFF before turning ignition switch to the ON position again, and then erase DTC.
- Check the all self-diagnostic screen to confirm there are no DTCs in other ECUs.
Freeze Frame DataÂ
The Freeze Frame Data shows the state of the vehicle at the time a DTC is detected and is useful in re-creating the circumstances that caused the malfunction.
|
Item |
Value (unit) |
||
|
CONSULT screen terms |
Full spell |
CONSULT screen terms |
Full spell |
|
OCCURRENCE TRACER |
Occurrence tracer |
ERROR |
Error |
|
EVENT |
Event |
||
|
PERIPHERAL DATA |
Peripheral data |
ERROR |
Error |
|
EVENT |
Event |
||
|
KILOMETER READING - FIRST OCCURRENCE |
Kilometer reading - first occurrence |
km |
-- |
|
NOT AVLBL / DEFAULT |
Not available / Default |
||
|
KILOMETER READING - LAST OCCURRENCE |
Kilometer reading - last occurrence |
km |
-- |
|
NOT AVLBL / DEFAULT |
Not available / Default |
||
|
FREQUENCY COUNTER - LAST OCCURRENCE |
Frequency counter - last occurrence |
-- |
-- |
|
NOT AVLBL / DEFAULT |
Not available / Default |
||
|
OPRATNG CYCL COUNTR - LST OCCURRNCE |
Operating cycle counter - last occurrence |
-- |
-- |
|
NOT AVLBL / DEFAULT |
Not available / Default |
||
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.