2018 Infiniti QX30 BaseFACTORY OEM SERVICE PROCEDURE

Work Procedure

  1. PRECONDITION-1 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. On the CONSULT screen, select "ENGINE">>"WORK SUPPORT">>"TEACH IN OF THROTTLE VALVE STOP".
    3. Touch "Start".

    GO TO 2.

  2. PRECONDITION-2 

    SYMBOL With CONSULT

    Check the following conditions.

    ENGINE SPEED

    ≤ 10 1/min

    COOLANT TEMPERATURE

    5 deg.C (41 deg.F) ≤ temperature ≥ 100 deg.C (212 deg.F)

    C/AIR TENP/S U/STRM THRTL

    ≤ 40 deg.C (104 deg.F)

    ACCEL PEDAL SENSOR

    ≤ 5%

    Is the condition satisfied?

    YES

    GO TO 3.

    NO

    Satisfy the condition, and GO TO 3.

  3. START 

    SYMBOL With CONSULT

    Touch "Start" and wait a few seconds.

    Is "Test Finished" displayed on CONSULT screen?

    YES

    END

    NO

    Follow the instruction of CONSULT display.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.