2017 Infiniti QX30 BaseFACTORY OEM SERVICE PROCEDURE

System Description: Description

ECM controls fuel-air mixture to the rich side to achieve quiet and stable engine revolution.

A Enrichment rate
a Start
b Start of post-start enrichment
c Start of warm-up enrichment
t Time
t1 Starting mixture enrichment (Duration: 2 seconds)
t2 Post-start enrichment control
[Duration e.g. 15 seconds at coolant temperature of 15Β°C (59Β°F)]
t3 Warm-up enrichment control
(Duration depends on the coolant temperature)
GNSJSBIA5069ZZ-069Courtesy of NISSAN NORTH AMERICA, INC.

Cold starting mixture enrichment control has functions as follows.

  • Starting mixture enrichment control
  • Post-start enrichment control
  • Warm-up enrichment control
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.