Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Infiniti Q60 Base, AWDFACTORY OEM SERVICE PROCEDURE
Stop/Start System
| DTC No. | Malfunction Type | Engine Operating Condition In Fail-Safe Mode | |
|---|---|---|---|
| P0001 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0003 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0004 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0011 | SIGNAL PLAUSIBILITY ERROR | Prohibits the stop/start operation. | |
| P0012 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0016 | SIGNAL PLAUSIBILITY ERROR | Prohibits the stop/start operation. | |
| SIG ABOVE ALLOWABLE RANGE | Prohibits the stop/start operation. | ||
| P0017 | SIGNAL PLAUSIBILITY ERROR | Prohibits the stop/start operation. | |
| SIG ABOVE ALLOWABLE RANGE | Prohibits the stop/start operation. | ||
| P0087 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| MISSING MESSAGE | Prohibits the stop/start operation. | ||
| P0088 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0106 | SG BS LVL O-OF RNG/ZR AJST ERR | Prohibits the stop/start operation. | |
| SIGNAL STUCK IN RANGE | Prohibits the stop/start operation. | ||
| P0107 | CIRCUIT SHORT TO GROUND | Prohibits the stop/start operation. | |
| P0108 | CIRCUIT SHORT TO BATTERY | Prohibits the stop/start operation. | |
| P0115 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0116 | SIGNAL COMPARE ERROR | Prohibits the stop/start operation. | |
| SIGNAL PLAUSIBILITY ERROR | Prohibits the stop/start operation. | ||
| SIG BELOW ALLOWABLE RANGE | Prohibits the stop/start operation. | ||
| SIG ABOVE ALLOWABLE RANGE | Prohibits the stop/start operation. | ||
| SIGNAL INVALID | Prohibits the stop/start operation. | ||
| P0117 | CIRCUIT SHORT TO GROUND | Prohibits the stop/start operation. | |
| P0118 | CIRCUIT SHORT TO BATTERY | Prohibits the stop/start operation. | |
| P0119 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0119 | SIG RTE OF CHNG ABV THRESHLD | Prohibits the stop/start operation. | |
| P0190 | CIRC VOLT BELOW THRESHOLD | Prohibits the stop/start operation. | |
| CIRC VOLT ABOVE THRESHOLD | Prohibits the stop/start operation. | ||
| P0191 | CIRC VOLT BELOW THRESHOLD | Prohibits the stop/start operation. | |
| CIRC VOLT ABOVE THRESHOLD | Prohibits the stop/start operation. | ||
| P0192 | CIRCUIT SHORT TO GROUND | Prohibits the stop/start operation. | |
| P0193 | CIRCUIT SHORT TO BATTERY | Prohibits the stop/start operation. | |
| P0300 | SIG ABOVE ALLOWABLE RANGE | Prohibits the stop/start operation. | |
| P0335 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0339 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0341 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0342 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0343 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0366 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0367 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0368 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P0697 | SYSTEM INTERNAL MALFUNCTN | Prohibits the stop/start operation. | |
| P167B | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1CDE | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1CDF | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1CE2 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1D04 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1D05 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1D06 | NO SUBTYPE INFORMATION | Prohibits the stop/start operation. | |
| P1D07 | SUPERVISION SOFTWARE ERROR | Prohibits the stop/start operation. | |
| P2617 | CIRCUIT OPEN | Prohibits the stop/start operation. | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.