2016 Infiniti QX50 AWDFACTORY OEM SERVICE PROCEDURE

Driving Pattern C

Driving pattern C means operating vehicle as per the following:

The following conditions should be satisfied at the same time:

Engine speed: (Engine speed in the freeze frame data) +-375 rpm

Calculated load value: (Calculated load value in the freeze frame data) x (1+-0.1) [%]

Engine coolant temperature condition:

  • When the freeze frame data shows lower than 70°C (158°F), engine coolant temperature should be lower than 70°C (158°F).
  • When the freeze frame data shows higher than or equal to 70°C (158°F), engine coolant temperature should be higher than or equal to 70°C (158°F).
NOTE:
  • When the same malfunction is detected regardless of the above vehicle conditions, reset the counter of driving pattern C.
  • When the above conditions are satisfied without detecting the same malfunction, reset the counter of driving pattern C.
  • The 1st trip DTC will be cleared when C counter is counted once without the same malfunction after DTC is stored in ECM.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.