2016 Infiniti Q50 Base, AWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas 3.10 OZS. 0.09 L PAG SP-10 S
Air Cond Refrigerant 1.10 LBS. 0.49 KG HFC-134a (R-134a) S
Automatic Transmission Fluid Gas 9.75 QTS. 9.22 L NISSAN Automatic Transmission Fluid Matic S Using Fluid other than Genuine NISSAN Matic S ATF will cause deterioration in drive ability and automatic transmission durability, and may damage the automatic transmission. The capacity is a reference quantity. S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Differential Gear Oil Front 1.38 PTS. 0.65 L Genuine NISSAN Hypoid Differential Oil Hypoid Super GL-5 80W-90 or API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures always above 32Deg.F (0Deg.C). S
Differential Gear Oil Rear 2.25 PTS. 1.06 L API - GL-5, SAE 75W-90 Synthetic Gear Oil or equivalent S
Engine Coolant 2.0L Eng w/Reservoir tank 9.50 QTS. 8.99 L BASF Glysantin G48 S
Engine Oil AWD,2.0L Eng Drain and Refill,w/Filter 7.00 QTS. 6.62 L API - SAE 0W-30 As an alternative to API - SAE 0W-30 OIL, SAE 0W-40, 5W-30 and 5W-40 may be used. S
Engine Oil AWD,2.0L Eng Drain and Refill,w/o Filter 6.50 QTS. 6.15 L API - SAE 0W-30 As an alternative to API - SAE 0W-30 OIL, SAE 0W-40, 5W-30 and 5W-40 may be used. S
Fuel Tank Gas 20.00 GALS. 75.7 L S
Power Steering Fluid Gas N/A N/A Genuine NISSAN E-PSF or equivalent The use of power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly. S
Transfer Case Fluid 2.13 PTS. 1 L Genuine NISSAN Matic J Automatic Transmission Fluid Using transfer fluid other than Genuine NISSAN Matic J ATF will cause deterioration in drive ability and transfer durability, and may damage the transfer, which is not covered by the INFINITI new vehicle limited warranty. S
Windshield Washer Fluid N/A N/A Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.