Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Infiniti QX80 Base, AWDFACTORY OEM SERVICE PROCEDURE
Engine Compartment
| 1. | VVEL actuator motor (bank 2) | 2. | Ignition coil (with power transistor) and spark plug (bank 2) | 3. | Camshaft position sensor (bank 2) |
| 4. | High pressure fuel pump | 5. | Intake valve timing control solenoid valve (bank 2) | 6. | Electric-viscous fan assembly |
| 7. | Engine oil temperature sensor | 8. | Intake valve timing control solenoid valve (bank 1) | 9. | Camshaft position sensor (bank 1) |
| 10. | Ignition coil (with power transistor) and spark plug (bank 1) | 11. | VVEL actuator motor (bank 1) | 12. | Low fuel pressure sensor* |
| 13. | Positive crankcase ventilation (PCV) valve | 14. | Fuel injector (bank 2) | 15. | Knock sensor (bank 2) |
| 16. | Knock sensor (bank 1) | 17. | Fuel injector (bank 1) | 18. | Fuel rail pressure sensor |
| 19. | Manifold absolute pressure sensor | 20. | VVEL control shaft position sensor (bank 1) | 21. | Crankshaft position sensor |
| 22. | Engine coolant temperature sensor | 23. | VVEL control shaft position sensor (bank 2) | Β | Β |
| A. | Top view of the engine (View with intake manifold is removed) |
B. | Rear view of the engine | Β | Β |
| : Engine front | Β | Β | Β | Β |
* : Not applicable
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
