2013 Infiniti M37 BaseFACTORY OEM SERVICE PROCEDURE

Air Bag Diagnosis Sensor Unit Functions

Air bag diagnosis sensor unit has the following functions.

  • Detects a collision and supplies the energy for deploying air bag and seat belt pre-tensioner.
  • Detects and records electrical malfunction in air bag system and seat belt pre-tensioner system, and blinking air bag warning lamp.
  • Detects and records the deployment of air bag and seat belt pre-tensioner, and turns ON air bag warning lamp.
  • Indicates malfunctioning portion via the number of blinks from the air bag warning lamp in the diagnosis mode.
  • Indicates the malfunction record via CONSULT.
  • Suppresses the deployment of passenger air bag when passenger seat is empty or occupied by child or child-seat.
  • When passenger seat is occupied by child or child seat, turns ON passenger air bag OFF indicator.
  • When judges that passenger seat is occupied by a adult or a child and passenger seat belt is not fasten, turns ON seat belt warning lamp. Further information for the seat belt warning system, refer to "PRE-CRASH SEAT BELT SYSTEM: SYSTEM DESCRIPTION ".
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.