2013 Infiniti M35hFACTORY OEM SERVICE PROCEDURE

Component Description

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
Component Reference
A/T shift selector (detention switch)   
BCM   
HPCM   
IPDM E/R   
NATS antenna amp.   
TCM   
SYSTEM DESCRIPTION
Combination meter   
SYSTEM DESCRIPTION
Door lock and unlock switch SYSTEM DESCRIPTION
Door request switch SYSTEM DESCRIPTION
Door switch   
SYSTEM DESCRIPTION
Hood switch   
SYSTEM DESCRIPTION
Inside key antenna   
SYSTEM DESCRIPTION
Intelligent Key   
SYSTEM DESCRIPTION
Push-button ignition switch   
SYSTEM DESCRIPTION
Remote keyless entry receiver   
SYSTEM DESCRIPTION
Security indicator lamp   
SYSTEM DESCRIPTION
Steering lock relay (Models with steering lock unit)   
SYSTEM DESCRIPTION
Steering lock unit  (Models with steering lock unit)  
SYSTEM DESCRIPTION
Stop lamp switch   
SYSTEM DESCRIPTION
Trunk key cylinder switch   
SYSTEM DESCRIPTION
Trunk lid opener request switch SYSTEM DESCRIPTION
Trunk room lamp switch   
SYSTEM DESCRIPTION
Vehicle information display   
SYSTEM DESCRIPTION
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.