2013 Infiniti M35hFACTORY OEM SERVICE PROCEDURE

DTC Index

x: Applicable -: Not applicable
DTC(1) Items (CONSULT screen terms) SRT code Trip MIL Permanent DTC group(3)
CONSULT(2)
U0101 LOST COMM (ATCU) - 1 x B
U0293 LOST COMM (HV ECU) - 1 x B
U1001 CAN COMM CIRCUIT - 2 - -
U1003 CAN COMM CIRCUIT - 2 - -
P0000  NO DTC IS DETECTED. 
FURTHER TESTING 
MAY BE REQUIRED. 		 - - Flashing (6) -
P0011 INT/V TIM CONT-B1 - 2 x B
P0014 EXH/V TIM CONT-B1 - 2 x B
P0021 INT/V TIM CONT-B2 - 2 x B
P0024 EXH/V TIM CONT-B2 - 2 x B
P0031 A/F SEN1 HTR (B1) - 2 x B
P0032 A/F SEN1 HTR (B1) - 2 x B
P0037 HO2S2 HTR (B1) - 2 x B
P0038 HO2S2 HTR (B1) - 2 x B
P0051 A/F SEN1 HTR (B2) - 2 x B
P0052 A/F SEN1 HTR (B2) - 2 x B
P0057 HO2S2 HTR (B2) - 2 x B
P0058 HO2S2 HTR (B2) - 2 x B
P0075 INT/V TIM V/CIR-B1 - 2 x B
P0078 EX V/T ACT/CIRC-B1 - 2 x B
P0081 INT/V TIM V/CIR-B2 - 2 x B
P0084 EX V/T ACT/CIRC-B2 - 2 x B
P0101 MAF SEN/CIRCUIT-B1 - 2 x B
P0102 MAF SEN/CIRCUIT-B1 - 1 x B
P0103 MAF SEN/CIRCUIT-B1 - 1 x B
P010B MAF SEN/CIRCUIT-B2 - 2 x B
P010C MAF SEN/CIRCUIT-B2 - 1 x B
P010D MAF SEN/CIRCUIT-B2 - 1 x B
P0111 IAT SENSOR1 B1 - 2 x A
P0112 IAT SEN/CIRCUIT-B1 - 2 x B
P0113 IAT SEN/CIRCUIT-B1 - 2 x B
P0116 ECT SEN/CIRC - 2 x A
P0117 ECT SEN/CIRC - 1 x B
P0118 ECT SEN/CIRC - 1 x B
P0122 TP SEN 2/CIRC-B1 - 1 x B
P0123 TP SEN 2/CIRC-B1 - 1 x B
P0125 ECT SENSOR - 2 x B
P0127 IAT SENSOR-B1 - 2 x B
P0128 THERMSTAT FNCTN - 2 x B
P0130 A/F SENSOR1 (B1) - 2 x A
P0131 A/F SENSOR1 (B1) - 2 x B
P0132 A/F SENSOR1 (B1) - 2 x B
P0133 A/F SENSOR1 (B1) x 2 x A
P0137 HO2S2 (B1) x 2 x A
P0138 HO2S2 (B1) x 2 x A
P0139 HO2S2 (B1) x 2 x A
P014C A/F SENSOR1 (B1) x 2 x A
P014D A/F SENSOR1 (B1) x 2 x A
P014E A/F SENSOR1 (B2) x 2 x A
P014F A/F SENSOR1 (B2) x 2 x A
P0150 A/F SENSOR1 (B2) - 2 x A
P0151 A/F SENSOR1 (B2) - 2 x B
P0152 A/F SENSOR1 (B2) - 2 x B
P0153 A/F SENSOR1 (B2) x 2 x A
P0157 HO2S2 (B2) x 2 x A
P0158 HO2S2 (B2) x 2 x A
P0159 HO2S2 (B2) x 2 x A
P0171 FUEL SYS-LEAN-B1 - 2 x B
P0172 FUEL SYS-RICH-B1 - 2 x B
P0174 FUEL SYS-LEAN-B2 - 2 x B
P0175 FUEL SYS-RICH-B2 - 2 x B
P0181 FTT SENSOR - 2 x A or B
P0182 FTT SEN/CIRCUIT - 2 x B
P0183 FTT SEN/CIRCUIT - 2 x B
P0196 EOT SENSOR - 2 x A or B
P0197 EOT SEN/CIRC - 2 x B
P0198 EOT SEN/CIRC - 2 x B
P0201 INJECTOR CIRC-CYL1 - 1 - -
P0202 INJECTOR CIRC-CYL2 - 1 - -
P0203 INJECTOR CIRC-CYL3 - 1 - -
P0204 INJECTOR CIRC-CYL4 - 1 - -
P0205 INJECTOR CIRC-CYL5 - 1 - -
P0206 INJECTOR CIRC-CYL6 - 1 - -
P0222 TP SEN 1/CIRC-B1 - 1 x B
P0223 TP SEN 1/CIRC-B1 - 1 x B
P0227 TP SEN 2/CIRC-B2 - 1 x B
P0228 TP SEN 2/CIRC-B2 - 1 x B
P0300 MULTI CYL MISFIRE - 1 or 2 x B
P0301 CYL 1 MISFIRE - 1 or 2 x B
P0302 CYL 2 MISFIRE - 1 or 2 x B
P0303 CYL 3 MISFIRE - 1 or 2 x B
P0304 CYL 4 MISFIRE - 1 or 2 x B
P0305 CYL 5 MISFIRE - 1 or 2 x B
P0306 CYL 6 MISFIRE - 1 or 2 x B
P0327 KNOCK SEN/CIRC-B1 - 2 - -
P0328 KNOCK SEN/CIRC-B1 - 2 - -
P0332 KNOCK SEN/CIRC-B2 - 2 - -
P0333 KNOCK SEN/CIRC-B2 - 2 - -
P0335 CKP SEN/CIRCUIT - 2 x B
P0340 CMP SEN/CIRC-B1 - 2 x B
P0345 CMP SEN/CIRC-B2 - 2 x B
P0420 TW CATALYST SYS-B1 x 2 x A
P0430 TW CATALYST SYS-B2 x 2 x A
P0441 EVAP PURG FLOW/MON x 2 x A
P0443 PURG VOLUME CONT/V - 2 x A
P0444 PURG VOLUME CONT/V - 2 x B
P0445 PURG VOLUME CONT/V - 2 x B
P0447 VENT CONTROL VALVE - 2 x B
P0448 VENT CONTROL VALVE - 2 x B
P0451 EVAP SYS PRES SEN - 2 x A
P0452 EVAP SYS PRES SEN - 2 x B
P0453 EVAP SYS PRES SEN - 2 x B
P0456 EVAP VERY SML LEAK x(5) 2 x A
P0460 FUEL LEV SEN SLOSH - 2 x A
P0461 FUEL LEVEL SENSOR - 2 x B
P0462 FUEL LEVL SEN/CIRC - 2 x B
P0463 FUEL LEVL SEN/CIRC - 2 x B
P0500 VEHICLE SPEED SENSOR A(4) - 2 x B
P0506 ISC SYSTEM - 2 x B
P0507 ISC SYSTEM - 2 x B
P050A COLD START CONTROL - 2 x A
P050B COLD START CONTROL - 2 x A
P050E COLD START CONTROL - 2 x A
P0520 EOP SENSOR/SWITCH - 2 - -
P0603 ECM BACK UP/CIRCUIT - 2 x B
P0605 ECM - 1 or 2 x or - B
P0607 ECM - 1 x B
P0643 SENSOR POWER/CIRC - 1 x B
P0705 T/M RANGE SENSOR A - 2 x B
P0710 FLUID TEMP SENSOR A - 2 x B
P0717 INPUT SPEED SENSOR A - 2 x B
P0720 OUTPUT SPEED SENSOR(4) - 2 x B
P0729 6GR INCORRECT RATIO - 2 x B
P0730 INCORRECT GR RATIO - 2 x B
P0731 1GR INCORRECT RATIO - 2 x B
P0732 2GR INCORRECT RATIO - 2 x B
P0733 3GR INCORRECT RATIO - 2 x B
P0734 4GR INCORRECT RATIO - 2 x B
P0735 5GR INCORRECT RATIO - 2 x B
P0745 PC SOLENOID A - 2 x B
P0750 SHIFT SOLENOID A - 2 x B
P0775 PC SOLENOID B - 2 x B
P0780 SHIFT - 1 x B
P0795 PC SOLENOID C - 2 x B
P1078 EXH TIM SEN/CIRC-B1 - 2 x B
P1084 EXH TIM SEN/CIRC-B2 - 2 x B
P1148 CLOSED LOOP-B1 - 1 x A
P1168 CLOSED LOOP-B2 - 1 x A
P1217 ENG OVER TEMP - 1 x B
P1225 CTP LEARNING-B1 - 2 - -
P1226 CTP LEARNING-B1 - 2 - -
P1233 ETC FNCTN/CIRC-B2 - 1 x B
P1234 CTP LEARNING-B2 - 2 - -
P1235 CTP LEARNING-B2 - 2 - -
P1236 ETC MOT-B2 - 1 x B
P1238 ETC ACTR-B2 - 1 x B
P1239 TP SENSOR-B2 - 1 x B
P1290 ETC MOT PWR-B2 - 1 x B
P1425 COLD START CONTROL - 2 x A
P1550 BAT CURRENT SENSOR - 2 - -
P1551 BAT CURRENT SENSOR - 2 - -
P1552 BAT CURRENT SENSOR - 2 - -
P1553 BAT CURRENT SENSOR - 2 - -
P1554 BAT CURRENT SENSOR - 2 - -
P1730 INTERLOCK - 2 x B
P1734 7GR INCORRECT RATIO - 2 x B
P1805 BRAKE SW/CIRCUIT - 2 - -
P2100 ETC MOT PWR-B1 - 1 x B
P2101 ETC FNCTN/CIRC-B1 - 1 x B
P2103 ETC MOT PWR - 1 x B
P2118 ETC MOT-B1 - 1 x B
P2119 ETC ACTR-B1 - 1 x B
P2132 TP SEN 1/CIRC-B2 - 1 x B
P2133 TP SEN 1/CIRC-B2 - 1 x B
P2135 TP SENSOR-B1 - 1 x B
P2713 PC SOLENOID D - 2 x B
P2722 PC SOLENOID E - 2 x B
P2731 PC SOLENOID F - 2 x B
P2807 PC SOLENOID G - 2 x B
P2A00 A/F SENSOR1 (B1) - 2 x A
P2A03 A/F SENSOR1 (B2) - 2 x A
P31A5 COMMUNICATION ERROR - 1 x B
(1) 1st trip DTC No. is the same as DTC No.
(2) This number is prescribed by SAE J2012/ISO 15031-6.
(3) Refer to "DIAGNOSIS DESCRIPTION ", "PERMANENT DIAGNOSTIC TROUBLE CODE (PERMANENT DTC)".
(4) When the fail-safe operations for both self-diagnoses occur, the MIL illuminates.
(5) SRT code will not be set if the self-diagnostic result is NG.
(6) When the ECM is in the mode that displays SRT status, MIL may blink. For the details, refer to "SRT STATUS Mode ".
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.