Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
RELAY CONTROL SYSTEM: System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
| Control relay | Input/output | Transmit unit | Control part | Reference page |
|---|---|---|---|---|
| Front fog lamp relay | Front fog lamp request signal | BCM (CAN) | Front fog lamp | FRONT FOG LAMP CIRCUIT |
|
|
BCM (CAN) |
|
HEADLAMP (LO) CIRCUIT HEADLAMP (HI) CIRCUIT |
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING LAMP CIRCUIT |
|
Front wiper request signal | BCM (CAN) | Front wiper | FRONT WIPER DOES NOT OPERATE |
| Front wiper auto stop signal | Front wiper motor | |||
| Ignition relay-1 | Ignition switch ON signal | BCM (CAN) | Ignition relay-1 | B260A IGNITION RELAY |
| Vehicle speed signal | Combination meter (CAN) | |||
| Push-button ignition switch | Push-button ignition switch | |||
| Fuel pump relay | Fuel pump request signal | ECM | Fuel pump | FUEL PUMP |
| ECM relay | ECM relay control signal | ECM | ECM relay | POWER SUPPLY AND GROUND CIRCUIT |
| Throttle control motor relay | Throttle control motor relay signal | ECM | Throttle control motor relay | P2101 ELECTRIC THROTTLE CONTROL FUNCTION |
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor | MAGNET CLUTCH |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.