2012 Infiniti QX56 RWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 7.00 OZS. 0.2 L PAG 46 S
Air Cond Refrigerant 2.32 LBS. 1.05 KG HFC-134a (R-134a) S
Automatic Transmission Fluid 10.63 QTS. 10.05 L NISSAN Automatic Transmission Fluid Matic S Using Fluid other than Genuine NISSAN Matic S ATF will cause deterioration in drive ability and automatic transmission durability, and may damage the automatic transmission. The capacity is a reference quantity. S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Differential Gear Oil Front 0.82 QTS. 0.77 L Genuine NISSAN Hypoid Differential Oil Hypoid Super GL-5 80W-90 or API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures always above 32Deg.F (0Deg.C). S
Differential Gear Oil Rear 1.88 QTS. 1.77 L API - GL-5, SAE 75W-90 Synthetic Gear Oil or equivalent S
Engine Coolant w/Reservoir tank 15.75 QTS. 14.9 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent S
Engine Oil Drain and Refill,w/Filter 6.88 QTS. 6.51 L API - SAE 5W-30 INFINITI recommends Genuine NISSAN Ester Engine Oil. S
Engine Oil Drain and Refill,w/o Filter 6.50 QTS. 6.15 L API - SAE 5W-30 INFINITI recommends Genuine NISSAN Ester Engine Oil. S
Engine Oil Dry engine 8.00 QTS. 7.57 L API - SAE 5W-30 INFINITI recommends Genuine NISSAN Ester Engine Oil. S
Fuel Tank 26.00 GALS. 98.42 L S
Power Steering Fluid 1.13 QTS. 1.06 L Genuine NISSAN Power Steering Fluid or equivalent DEXRON VI type ATF may also be used. S
Transfer Case Fluid 1.57 QTS. 1.48 L Genuine NISSAN Transfer Fluid for ATX90A transfer Using transfer fluid other than Genuine NISSAN Transfer Fluid will damage the transfer, which is not covered by the INFINITI new vehicle limited warranty. See an INFINITI retailer for recommended transfer fluid. S
Windshield Washer Fluid N/A N/A Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.