Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Infiniti M37 xFACTORY OEM SERVICE PROCEDURE
System Description: Description
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- ADAS* control unit controls the following systems, based on ITS communication signals from the ICC sensor, the accelerator pedal actuator, the lane camera unit, and the side radar LH/RH and a CAN communication signal from each control unit.NOTE: *: Advanced Driver Assistance Systems
- Intelligent Cruise Control (ICC)
- Distance Control Assist (DCA)
- Intelligent Brake Assist (IBA)
- Brake Assist (with preview function)
- Forward Collision Warning (FCW)
- Lane Departure Warning (LDW)/Lane Departure Prevention (LDP)
- Blind Spot Warning (BSW)/Blind Spot Intervention (BSI)
- Active trace control function
| System | Reference |
|---|---|
| Intelligent Cruise Control (ICC) | "SYSTEM DESCRIPTION " |
| Distance Control Assist (DCA) | "SYSTEM DESCRIPTION " |
| Intelligent Brake Assist (IBA) | "INTELLIGENT BRAKE ASSIST: SYSTEM DESCRIPTION " |
| Brake Assist (with preview function) | "BRAKE ASSIST (WITH PREVIEW FUNCTION): SYSTEM DESCRIPTION " |
| Forward Collision Warning (FCW) | "SYSTEM DESCRIPTION " |
| Lane Departure Warning (LDW)/Lane Departure Prevention (LDP) | |
| Blind Spot Warning (BSW)/Blind Spot Intervention (BSI) | |
| Active trace control function | "ACTIVE STABILITY ASSIST: ACTIVE TRACE CONTROL FUNCTION " |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.