Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Infiniti M37 BaseFACTORY OEM SERVICE PROCEDURE
Active Test: Notes
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning lamp is illuminated.
- ICC system warning lamp
- Lane departure warning lamp
- BSW/BSI warning lamp
- IBA OFF indicator lamp (IBA system ON)
- Shift the selector lever to "P" position, and then perform the test.
| Test item | Description |
|---|---|
| METER LAMP | The ICC system warning lamp, MAIN switch indicator and IBA OFF indicator lamp can be illuminated by ON/OFF operations as necessary |
| STOP LAMP | The ICC brake hold relay can be operated by ON/OFF operations as necessary, and the stop lamp can be illuminated |
| ICC BUZZER | Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
| BRAKE ACTUATOR | Activates the brake by an arbitrary operation |
| Active Pedal | The accelerator pedal actuator can be operated as necessary |
| DCA INDICATOR | The DCA system switch indicator can be illuminated by ON/OFF operations as necessary |
| LDP BUZZER | Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
| WARNING SYSTEM IND | The warning systems ON indicator (on warning systems switch) can be illuminated by ON/OFF operations as necessary |
| LDP ON IND | The LDP ON indicator lamp can be illuminated by ON/OFF operations as necessary |
| LANE DEPARTURE W/L | The Lane departure warning lamp can be illuminated by ON/OFF operations as necessary |
| BSW/BSI WARNING LAMP | The BSW/BSI warning lamp can be illuminated by ON/OFF operations as necessary |
| BSI ON INDICATOR | The BSI ON indicator can be illuminated by ON/OFF operations as necessary |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.