ABS warning lamp and VDC warning lamp in combination meter turn ON when a malfunction occurs in system [ABS actuator and electric unit (control unit)]. The control is suspended for VDC function, TCS function, ABS function, brake limited slip differential (BLSD) function, brake assist function, Brake force distribution function, Rise-up & Build-up function (function of electrically-driven intelligent brake) and Active Trace Control function (function of electrically-driven intelligent brake). The vehicle status becomes the same as models without VDC function, TCS function, ABS function, brake limited slip differential (BLSD) function, brake assist function, Brake force distribution function, Rise-up & Build-up function (function of electrically-driven intelligent brake) and Active Trace Control function (function of electrically-driven intelligent brake). However, EBD function is operated normally.

NOTE: ABS self-diagnosis sound may be heard the same as in the normal condition, because self-diagnosis is performed when ignition switch turns ON and when vehicle initially starts.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Abs Function

Use the Manual With the Right Hardware

When to See a Mechanic