Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Infiniti G25 BaseFACTORY OEM SERVICE PROCEDURE
Input/Output Signal Chart
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART
| Output sensor/ECU | Signal name | Input ECU/actuator | Signal form |
|---|---|---|---|
| Accelerator pedal position sensor | Accelerator pedal position | VCM | Voltage |
| Electric shift | Shift position signal | EV system CAN | |
| Traction Motor Inverter | Motor speed signal | ||
| Motor torque limit signal | |||
| ABS actuator and electric unit (control unit) | ABS operation signal | ||
| VDC operation signal | |||
| TCS operation signal | |||
| Electrically-driven intelligent brake unit | Target braking force signal | ||
| VCM | Target motor torque signal | Traction Motor Inverter |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
