Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Infiniti G25 BaseFACTORY OEM SERVICE PROCEDURE
CONSULT Function: Function
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT FUNCTION CHART
| Diagnostic test mode | Function | ||
|---|---|---|---|
| ECU Identification | VCM part number can be read. | ||
| Self-diagnostic result | Self-diagnostic results and freeze frame data can be read and erased quickly.(1) | ||
| Data monitor | Input/Output data in VCM can be read. | ||
| Active test | Diagnostic Test Mode in which CONSULT drives some actuators apart from VCM and also shifts some parameters in a specified range. | ||
| Work support | This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT. | ||
| Load battery ID | Refer to Li-ion Battery ID Registration Operation Instructions. | ||
|
|||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.