2012 Infiniti G25 BaseFACTORY OEM SERVICE PROCEDURE

Work Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
  1. LI-ION BATTERY JUNCTION BOX DATA CLEAR

    With CONSULT 

    1. Turn power switch ON.
    2. Select "LI-ION BATTERY JUNCTION BOX DATA CLEAR" in "WORK SUPPORT" mode with CONSULT.
    3. Touch "START" and wait a few seconds.
    4. Check that "COMPLETE" is displayed on CONSULT screen.

    END

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.