2012 Infiniti G25 BaseFACTORY OEM SERVICE PROCEDURE

AV Control Unit: Specification

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
BOSE AUDIO & NAVIGATION SYSTEM SPECIFICATIONS

Manufacturer name Clarion Co., Ltd.
Display Screen size 7-inch wide VGA (157.2 mm x 82.32 mm)
Number of pixels 800 x480 pixels
Drive type TFT active matrix method
Touch panel detection Analog resistive touch
Amplifier output 45 W x 4ch
CD drive Used disc Ø12 cm
Playable disc CD CD-ROM (CD-DA)
CD-R(1)
CD-RW(1)
Playable format Music MP3
WMA
Text display function ID3/WMA tag Artist name
Album title
Song title
USB High communication standard USB2.0
Playable format Music MP3
WMA
Text display function ID3/WMA tag Artist name
Album title
Song title
iPod® Action(2) iPod Classic
iPod nano 5th generation
iPod nano 4th generation
iPod nano 3rd generation
iPod nano 2nd generation
iPod nano 1st generation
iPod 5th generation
iPod touch
iPhone
Bluetooth® audio Compliant communication type Wireless connection Bluetooth® communication
Compliant profile A2DP 1.2
AVRCP 1.3
Hands-free phone Compliant communication type Wireless connection Bluetooth® communication compliant type
Compliant profile HFP 1.0,1.5
DUN 1.1
OPP 1.1
Camera controller Guideline display function Width/distance display
Possible route line display/non-display switch
Steering signal input method CAN communication
Other functions Speed sensitive volume function
Steering switch compliant
Voice recognition function
(1) If the reflectance of the surface of the media is low, the data may not be read.
(2) It may not be used if it is not updated to the latest firmware or partial functions may not work if it is used.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.