Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Infiniti FX50FACTORY OEM SERVICE PROCEDURE
Configuration list
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
CONFIGURATION REFERENCE CHART - MANUAL SETTING
| MANUAL SETTING ITEM | NOTE | |
|---|---|---|
| Items | Setting value | |
| HANDLE | LHD | - |
CONFIGURATION REFERENCE CHART - AUTO SETTING
| AUTO SETTING ITEM | NOTE | |
|---|---|---|
| Items | Setting value | |
| ROOF FUNCTION | W/REQ SW | - |
| CONNECTION RECEIVER SET | MODE2 | - |
| BATTERY SAVER FUNCTION | MODE1 | - |
| DI LMP VARIAT | MODE4 | - |
| LIGHT RECOG | MODE4 | |
| TRANSMISSION | AT with ABS | - |
| RAIN SENSOR CONFIG | WITHOUT | - |
| HAZARD SW TYPE | MODE1 | - |
| BCM AC CONTROL | MODE1 | - |
| TIRE PRESSURE | 230kPa | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.