2011 Infiniti EX35 Journey, RWDFACTORY OEM SERVICE PROCEDURE

INTELLIGENT KEY SYSTEM : System Description

  • The Intelligent Key system is a system that makes it possible to lock and unlock the door locks (door lock/unlock function) by carrying the Intelligent Key, which operates based on the results of electronic ID verification using two-way communications between the Intelligent Key and the vehicle (BCM).
    CAUTION: The driver should always carry the Intelligent Key
  • The settings for each function can be changed with the CONSULT-III.
  • If an Intelligent Key is lost, a new Intelligent Key can be registered. A maximum of 4 Intelligent Keys can be registered.
  • It is possible to perform a diagnosis on the system and register an Intelligent Key with the CONSULT-III.
FUNCTION DESCRIPTION

Function Description Refer
Door lock function Lock/unlock can be performed by pressing the request switch. DOOR LOCK FUNCTION 
Remote keyless entry function Lock/unlock can be performed by pressing the remote controller button of the Intelligent Key. REMOTE KEYLESS ENTRY FUNCTION 
Back door open function The back door can be opened by carrying the Intelligent Key and pressing the back door opener switch. BACK DOOR OPEN FUNCTION 
Welcome light function The puddle lamp and room automatically turn ON, if the Intelligent Key is in the door outside key antenna detection area. WELCOME LIGHT FUNCTION 
Key reminder function The key reminder buzzer sounds a warning if the door is locked with the key left inside the vehicle. KEY REMINDER FUNCTION 
Warning function If an action that does not meet the operating condition of the Intelligent Key system is taken, the buzzer goes off to inform the driver. WARNING FUNCTION 
Engine start function The engine be turned on while carrying the Intelligent Key. INTELLIGENT KEY SYSTEM/ENGINE START FUNCTION
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.