2011 Infiniti EX35 Journey, RWDFACTORY OEM SERVICE PROCEDURE

Component Description

COMPONENT DESCRIPTION

Component Description
Lane camera unit
  • Transmits warning systems switch signal to ABS actuator and electric unit (control unit) unit via CAN communication.
  • Controls the FCW ON indicator when receiving a warning systems ON indicator signal from the ICC sensor integrated unit via CAN communication.
ABS actuator and electric unit (control unit)
  • Transmits vehicle speed signal to ICC sensor integrated unit via CAN communication.
  • Transmits warning systems switch signal to ICC sensor integrated unit via CAN communication.
Warning systems switch Inputs the switch signal to lane camera unit.
Warning systems ON indicator (On the warning systems switch) Indicates FCW system status.
Brake booster control unit
  • The ICC sensor integrated unit transmits the buzzer output signal to the brake booster control unit via ITS communication.
  • The brake booster control unit outputs the buzzer output signal to the ICC warning chime.
Unified meter and A/C amp. Receives the meter display signal, and IBA OFF indicator lamp signal from ICC sensor integrated unit via CAN communication and transmits them to the combination meter via the communication line.
Combination meter Perform the following operations using the signals received from the unified meter and A/C amp. via the communication line.
  • Displays the FCW operation status using the meter display signal.
  • Illuminates the IBA OFF indicator lamp using the IBA OFF indicator lamp signal.
ICC warning chime Warning chime sounds when the vehicle distance from the vehicle ahead is too close
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.