Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

COMMERCIAL SERVICE TOOL CHART

Tool name (Kent-Moore No.)		Description
Leak detector i.e.: (J-41416)	Courtesy of NISSAN MOTOR CO., U.S.A.	Locates the EVAP leak.
EVAP service port adapter i.e.: (J-41413-OBD)	Courtesy of NISSAN MOTOR CO., U.S.A.	Applies positive pressure through EVAP service port.
Fuel filler cap adapter i.e.: (MLR-8382)	Courtesy of NISSAN MOTOR CO., U.S.A.	Checks fuel tank vacuum relief valve opening pressure.
Socket wrench	Courtesy of NISSAN MOTOR CO., U.S.A.	Removes and installing engine coolant temperature sensor.
Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12)	Courtesy of NISSAN MOTOR CO., U.S.A.	Reconditions the exhaust system threads before installing a new heated oxygen sensor. Use with anti-seize lubricant shown below. a: 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor b: 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor
Anti-seize lubricant i.e.: (Permatex™ 133AR or equivalent meeting MIL specification MIL-A-907)	Courtesy of NISSAN MOTOR CO., U.S.A.	Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply: