2010 Infiniti M45 BaseFACTORY OEM SERVICE PROCEDURE

P0700 - P0745

DTC REFERENCE CHART

DTC(1) Items (CONSULT-III screen terms)
CONSULT-III GST(2) ECM(3)
P0700 0700 TCM
P0705 0705 PNP SW/CIRC
P0710 0710 ATF TEMP SEN/CIRC
P0717 0717 TURBINE SENSOR
P0720 0720 VEH SPD SEN/CIR AT(4)
P0731 0731 A/T 1ST GR FNCTN
P0732 0732 A/T 2ND GR FNCTN
P0733 0733 A/T 3RD GR FNCTN
P0734 0734 A/T 4TH GR FNCTN
P0735 0735 A/T 5TH GR FNCTN
P0740 0740 TCC SOLENOID/CIRC
P0744 0744 A/T TCC S/V FNCTN
P0745 0745 L/PRESS SOL/CIRC
(1) 1st trip DTC No. is the same as DTC No.
(2) This number is prescribed by SAE J2012.
(3) In Diagnostic Test Mode II (Self-diagnostic results), this number is controlled by NISSAN.
(4) When the fail-safe operations for both self-diagnoses (DTC P0500 and P0720) occur, the MIL illuminates.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.