Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Detailed Flow
- GET INFORMATION FOR SYMPTOM
Interview the customer about the symptom.
GO TO 2.
- PERFORM PRELIMINARY CHECK
At the beginning of inspection, confirm the condition of power supply circuit, check that the battery is charged and fuses and fusible links are not blown.
Is power supply circuit normal?
YES-1: GO TO 3. (With CONSULT-III)
YES-2: GO TO 4. (Without CONSULT-III)
NO: Repair or replace the battery and fuse/fusible links.
- PERFORM SELF-DIAGNOSIS USING "CONSULT-III" (WITH CONSULT-III)
Perform "AIR BAG" Self Diagnostic Result.
Is "MALFUNCTIONING PART" displayed on CONSULT-III?
YES: GO TO 5.
NO: Repeat DTC confirmation with diagnostic procedure.
- PERFORM SELF-DIAGNOSIS "AIR BAG" WARNING LAMP (WITHOUT CONSULT-III)
Check the air bag warning lamp status.
Is "MALFUNCTIONING PART" detected?
YES: GO TO 5.
NO: Repeat DTC confirmation with diagnostic procedure.
- REPAIR OR REPLACE
Repair or replace the malfunctioning part.
After the malfunction is repaired, erase the self-diagnostic result. Refer to "AIR BAG WARNING LAMP DIAGNOSIS " or "CONSULT-III FUNCTION ".
GO TO 6.
- FINAL CHECK
Perform "AIR BAG" Self Diagnostic Result with CONSULT-III and/or, air bag warning lamp status.
Are all malfunctions corrected?
YES: INSPECTION END
NO-1: GO TO 3. (With CONSULT-III)
NO-2: GO TO 4. (Without CONSULT-III)
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.