Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Infiniti M35 BaseFACTORY OEM SERVICE PROCEDURE
Brake Control System DTCS: C1101-C1116
DTC INDEX - C1101-C1116
| DTC | Items (CONSULT screen items) | Reference |
|---|---|---|
| C1101 | RR RH SENSOR-1 | WHEEL SENSOR CIRCUIT |
| C1102 | RR LH SENSOR-1 | |
| C1103 | FR RH SENSOR-1 | |
| C1104 | FR LH SENSOR-1 | |
| C1105 | RR RH SENSOR-2 | |
| C1106 | RR LH SENSOR-2 | |
| C1107 | FR RH SENSOR-2 | |
| C1108 | FR LH SENSOR-2 | |
| C1109 | BATTERY VOLTAGE [ABNORMAL] | ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIRCUIT |
| C1110 | CONTROLLER FAILURE | ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) |
| C1111 | PUMP MOTOR | ABS MOTOR AND MOTOR RELAY CIRCUIT |
| C1114 | MAIN RELAY | SOLENOID, VDC CHANGE-OVER VALVE AND ACTUATOR RELAY CIRCUIT |
| C1115 | ABS SENSOR [ABNORMAL SIGNAL] | WHEEL SENSOR CIRCUIT |
| C1116 | STOP LAMP SW | STOP LAMP SWITCH CIRCUIT |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
