2008 Infiniti G35 BaseFACTORY OEM SERVICE PROCEDURE

DTC Detection Logic

NOTE:
  • If DTC P0461 is displayed with DTC U1000 or U1001, first perform the trouble diagnosis for DTC U1000, U1001. Refer to "DTC LOGIC ".
  • If DTC P0461 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "DTC LOGIC ".

Driving long distances naturally affect fuel gauge level.

This diagnosis detects the fuel gauge malfunction of the gauge not moving even after a long distance has been driven.

DTC DETECTION CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0461 Fuel level sensor circuit range/performance The output signal of the fuel level sensor does not change within the specified range even though the vehicle has been driven a long distance.
  • Harness or connectors (The CAN communication line is open or shorted)
  • Harness or connectors (The sensor circuit is open or shorted)
  • Unified meter and A/C amp.
  • Fuel level sensor
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.