2008 Infiniti G35 BaseFACTORY OEM SERVICE PROCEDURE

DTC Detection Logic

This diagnosis detects a very large leak (fuel filler cap fell off etc.) in EVAP system between the fuel tank and EVAP canister purge volume control solenoid valve.

Fig 1: EVAP Control System Diagram
G04875207Courtesy of NISSAN MOTOR CO., U.S.A.
DTC DETECTION CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0455 EVAP control system gross leak detected EVAP control system has a very large leak such as fuel filler cap fell off, EVAP control system does not operate properly.
  • Fuel filler cap remains open or fails to close.
  • Incorrect fuel tank vacuum relief valve
  • Incorrect fuel filler cap used
  • Foreign matter caught in fuel filler cap.
  • Leak is in line between intake manifold and EVAP canister purge volume control solenoid valve.
  • Foreign matter caught in EVAP canister vent control valve.
  • EVAP canister or fuel tank leaks
  • EVAP purge line (pipe and rubber tube) leaks
  • EVAP purge line rubber tube bent.
  • Loose or disconnected rubber tube
  • EVAP canister vent control valve and the circuit
  • EVAP canister purge volume control solenoid valve and the circuit
  • Fuel tank temperature sensor
  • O-ring of EVAP canister vent control valve is missing or damaged.
  • EVAP control system pressure sensor
  • Refueling EVAP vapor cut valve
  • ORVR system leaks
CAUTION:
  • Use only a genuine NISSAN fuel filler cap as a replacement. If an incorrect fuel filler cap is used, the MIL may come on.
  • If the fuel filler cap is not tightened properly, the MIL may come on.
  • Use only a genuine NISSAN rubber tube as a replacement.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.