Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
| Control relay | Input/output | Transmit unit | Control part | Reference | ||
|---|---|---|---|---|---|---|
|
|
BCM (CAN) |
|
B26E1 NO RECEPTION OF ENGINE STATUS SIGNAL | ||
| Front fog lamp relay | Front fog light request signal | BCM (CAN) | Front fog lamp | FRONT FOG LAMP SYSTEM | ||
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING, LICENSE PLATE AND TAIL LAMPS SYSTEM , ILLUMINATION CONTROL SYSTEM | ||
|
Front wiper request signal | BCM (CAN) | Front wiper | C1734 CONTROL UNIT | ||
| Front wiper auto stop signal | Front wiper motor | |||||
|
|
BCM (CAN) |
|
COMPONENT DESCRIPTION | ||
|
Starter control relay signal | BCM (CAN) | Starter motor | B210B STARTER CONTROL RELAY , B210D STARTER RELAY | ||
| Steering lock unit condition signal | Steering lock unit | |||||
| Starter relay control signal | TCM | |||||
| Clutch interlock switch | ||||||
| Steering lock relay | Steering lock relay signal | BCM (CAN) | Steering lock unit | B2108 STEERING LOCK RELAY | ||
| Steering lock unit condition signal | Steering lock unit | |||||
| A/T device (Detention switch) signal | A/T device (Detention switch) | |||||
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (magnet clutch) | MAGNET CLUTCH | ||
| Ignition relay | Ignition switch ON signal | BCM (CAN) | Ignition relay | B2098 IGNITION RELAY ON STUCK | ||
| Vehicle speed signal | Unified meter and A/C amp. (CAN) | |||||
| Push-button ignition switch signal | Push-button ignition switch | |||||
|
NOTE:
|
||||||
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.