Quick Lookups: Fluids

2008 Infiniti EX35 Base, AWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.00 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 1.21 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid 10.88 QTS. 10.29 L NISSAN Automatic Transmission Fluid Matic S If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using ATF other than Genuine NISSAN Matic S ATF or Matic J ATF will cause deterioration in drive ability and Automatic Transmission durability, and may damage the Automatic Transmission. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front 0.70 QTS. 0.66 L API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures always above 32Deg.F (0Deg.C). S
Differential Gear Oil Rear 1.20 QTS. 1.13 L API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures always above 32Deg.F (0Deg.C). S
Engine Coolant 9.00 QTS. 8.51 L 50/50 mixture of NISSAN Long Life Antifreeze/Coolant or equivalent and demineralized or distilled water S
Engine Oil w/Filter 5.18 QTS. 4.9 L API - SAE 5W-30 S
Engine Oil w/o Filter 4.75 QTS. 4.49 L API - SAE 5W-30 S
Fuel Tank 20.00 GALS. 75.7 L S
Power Steering Fluid 1.05 QTS. 0.99 L NISSAN Power Steering Fluid or equivalent S
Transfer Case Fluid 1.33 QTS. 1.25 L NISSAN Automatic Transmission Fluid Matic J S
Windshield Washer Fluid N/A N/A Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.