SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSINFINITI2008EX35 BASE, AWDREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE CONTROL SYSTEM - DTCS P0451 TO P1212P0500 VSSDTC LOGICDTC DETECTION LOGIC
2008 Infiniti EX35 Base, AWD

DTC Detection Logic

2008 Infiniti EX35 Base, AWDSECTION DTC Detection Logic
NOTE:
  • If DTC P0500 is displayed with DTC U1000 or U1001, first perform the trouble diagnosis for DTC U1000, U1001. Refer to "DTC LOGIC ".
  • If DTC P0500 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to "DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSE REFERENCE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0500 Vehicle speed sensor The vehicle speed signal sent to ECM is almost 0 km/h (0 MPH) even when vehicle is being driven.
  • Harness or connectors (The CAN communication line is open or shorted)
  • Harness or connectors (The vehicle speed signal circuit is open or shorted)
  • Wheel sensor
  • Unified meter and A/C amp.
  • ABS actuator and electric unit (control unit)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.