2007 Infiniti M35 BaseFACTORY OEM SERVICE PROCEDURE

Automatic Transmission DTCS

AUTOMATIC TRANSMISSION DIAGNOSTIC TROUBLE CODES (DTC) IDENTIFICATION

Description DTC
A/T 1ST E/BRAKING P1731
ATF PRES SW 1/CIRC P1841
ATF PRES SW 3/CIRC P1843
ATF PRES SW 5/CIRC P1845
ATF PRES SW 6/CIRC P1846
A/T INTERLOCK P1730
A/T TCC S/V FNCTN P0744
ATF TEMP SEN/CIRC P1710
CAN COMM CIRCUIT U1000
D/C SOLENOID/CIRC P1762
D/C SOLENOID FNCTN P1764
ENGINE SPEED SIG P0725
FR/B SOLENOID/CIRC P1757
FR/B SOLENOID FNCT P1759
HLR/C SOL/CIRC P1767
HLR/C SOL FNCTN P1769
I/C SOLENOID/CIRC P1752
I/C SOLENOID FNCTN P1754
L/PRESS SOL/CIRC P0745
LC/B SOLENOID/CIRC P1772
LC/B SOLENOID FNCT P1774
MANU MODE SW/CIRC P1815
PNP SW/CIRC P0705
STARTER RELAY/CIRC P0615
TCC SOLENOID/CIRC P0740
TCM P0700
TP SEN/CIRC A/T P1705
TURBINE REV S/CIRC P0717
VEH SPD SE/CIR.MTR P1721
VEH SPD SEN/CIR AT P0720
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.