2007 Infiniti M35 BaseFACTORY OEM SERVICE PROCEDURE

Check Combination Meter Display Function

  1. CHECK METER DISPLAY 

    With CONSULT-II 

    Check the operation with ("LCD") in the ACTIVE TEST.

    Is each warning displayed on meter display? 

    OK or NG 

    OK: Meter display is OK.

    NG: Check combination meter. Refer to "SELF-DIAGNOSIS MODE OF COMBINATION METER ".

    Fig 1: CONSULT-II Display - Active Test
    G05212285
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.