Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Abs, EBD System
In the event there is a malfunction with the electrical system, the ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp will turn on when it is the ABS that is malfunctioning, and the brake warning lamp, ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp will turn on when it is the EBD that is malfunctioning. At the same time, the VDC/TCS/ABS will be put in one of the following states by the fail-safe function.
- When the ABS malfunctions, only the EBD operates. The condition is the same as that of models without VDC/TCS/ABS.NOTE: In step 1 shown above, self-diagnosis is performed when ignition switch is turned ON and when vehicle initially starts. ABS self-diagnosis sound may be heard as usual.
- When the EBD malfunctions, the EBD and ABS will not operate. The condition is the same as that of models without VDC/TCS/ABS and EBD.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.