Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Infiniti G35 xFACTORY OEM SERVICE PROCEDURE
With GST
NOTE:
Be sure to read the explanation of "Driving Pattern " before driving vehicle.
- Start engine.
- Drive vehicle according to "Driving Pattern ".
- Stop vehicle.
- Turn ignition switch OFF, wait at least 10 seconds and then tarn ON.
- Select Service $07 with GST.
- If P0455 is displayed on the screen, go to "Diagnostic Procedure ".
- If P0442 is displayed on the screen, go to "Diagnostic Procedure ".
- If P0441 is displayed on the screen, go to "Diagnostic Procedure ".
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
